Skip to content Menu

Home
Cygnus
Products
- - CYG1 – Cygnus Control Panel
    The control panel, which is an optional element, is used to capture data from up to 480 devices situated around a site. This data includes active fire alarms, intruder alerts, first aid alert, heat and smoke detector activations, battery low warning and signal failure. It is capable of holding event logs, so the user can[...]
  - CYG1-GSM/GPRS – Control Panel with GSM/GPRS Remote Link
    The Cygnus GSM control panel has all functionality of the standard CYG1 panel but in addition can send data directly to a third party monitoring station and/or as an SMS text to mobiles. The panel can also be accessed from a PC so users can remotely view the system’s status from any location. The user[...]
  - CYG6 - Cygnus Base Panel
    The CYG6 Cygnus base panel has been developed as the control panel, ideal for smaller construction sites. It is an optional element into the Cygnus system, and is used to capture data. This wireless alarm panel can be used in conjunction with other Cygnus control panels but has reduced networking capability and can support up[...]
  - CYG2 – Cygnus Call Point Alarm
    The Cygnus fire call point alarm operates using a single battery pack and can be used externally. This radio alarm device has also been designed as a standalone alarm unit. These devices are normally situated around a site in prominent places on main escape routes, stairwells and on, or near fire points where they are[...]
  - CYG2/85DB – Cygnus Call Point Alarm 85 Decibel
    The Cygnus 85 decibel fire call point alarm operates using a single battery pack and is IP rated, thus suitable for external use. This device has been designed as a standalone alarm unit as well as a radio alarm. These devices are built with a less audible sounder for quieter areas such as operational facilities[...]
  - CYG2F – Cygnus Call Point & First Aid Alert Alarm
    The impressive combined Cygnus fire call point and first aid alarm has all features of the CYG2 alarm but in addition boasts the first aid alert functionality for first aid emergencies. This operates in a different way to a fire alarm so as to distinguish the type of alarm. When a first aid alert is[...]
  - CYG3L – Cygnus Lithium Heat Detector
    Cygnus lithium heat detectors are an integral part of the system, providing essential detection in and out of working hours on all types of construction projects. These highly tested and extremely quality detectors work in the radio mesh like any other device and will help transmit and receive all other radio messages from other alarms[...]
  - CYG4L – Cygnus Lithium Smoke Detector
    Cygnus lithium smoke detectors have an optical smoke sensor and are an integral part of the system, providing essential detection in and out of working hours on all types of construction projects. Optical smoke detectors work using the light scatter principle. The detector changes to alarm state at a pre-set threshold of smoke penetration into[...]
  - CYG5 – Cygnus First Aid Alert Point
    The Cygnus first aid alert point has been designed to operate differently from all other types of alerts and alarms. Once triggered the fi rst aid alert will beep intermittently every 8seconds at 85 decibels. The control panel notifies the user the exact location within a zone where the alarm has been triggered. This helps[...]
  - CYGDI – Cygnus Detector Interface
    The Cygnus detector interface has been purposely built for use with the ALMWS01 smoke, ALMWS02 heat and ALMWS04 CO detectors. These detectors are radio linked and are designed to work in groups of up to eleven detectors per interface. The interface module can be assigned to a zone and has an individual unit number like[...]
  - CYGIOU – Cygnus Input/ Output Unit
    The Cygnus input/output unit has been designed for interfacing with other fire systems, turnstile gate entry systems and door release systems. In the case of an alarm activation, the interface will trigger the door release and will deactivate the turnstile so a quick evacuation can be made to the assembly point. Where a site has[...]
  - PIR - PIR Intruder Sensor
    The PIR functionality is available on all Cygnus alarms. This additional feature helps utilise fire, first aid alarms, and detectors for intruder activities. PIR works with the CYG1-GSM/GPRS control panel and sends users an SMS text alert should an intrusion occur. Alerts can also be sent to a third party monitoring station. The sensors are[...]
  - BATP01 - Cygnus Alkaline Battery Pack for CYG2, CYG2F, CYG5
    This alkaline battery pack is specially designed for the Cygnus Wireless call point alarms. This Cygnus battery pack is compatible with the following products: Cygnus Fire Call Point Alarm - CYG2 Cygnus Fire Call Point & First Aid Alert Point- CYG2F Cygnus First Aid Alert Point - CYG5
  - BATP03 - Cygnus Lithium Battery Pack
    This Cygnus lithium battery pack is specially designed for the Cygnus wireless smoke and heat detectors. It is compatible with the following products: Cygnus Heat Detector - CYG3L Cygnus Smoke Detector - CYG4L
  - CYHF/FP - CTEC Control Panel - 2 Zone
    The CYHF Control Panel is fully certified to EN54 parts 2 and 4. This is a conventional panel but can be linked into the Cygnus fire alarm system using the Cygnus IOU device. This allows the Cygnus system on site to communicate to the wireless alarm system fitted within a Temporary Accommodation Unit (TAU). The[...]
  - CYHF/FP4 - CTEC Control Panel - 4 Zone
    The CYHF Control Panel is fully certified to EN54 parts 2 and 4. This is a conventional panel but can also be linked into the Cygnus fire alarm system using the Cygnus input / output interface unit. This allows the Cygnus system on site to communicate to the wireless alarm system fitted within a Temporary[...]
  - CYHF/CP - Wireless Manual Call Point c/w Base & Batteries
    The CYHF/CP Manual Call Point (MCP) is a fully compliant intelligent device which is compatible with the CYHF range of expander and translator modules. This manual call point is resettable and has a visual warning indicator when activated. A reset key is supplied with the MCP for de-activating the alarm and for opening the base.[...]
  - CYHF/WTM - Wireless Translator Module (Loop Powered)
    The CYHF/WTM translator module is a key component in the CYHF detection and alarm system. It is connected into a wired loop off the CYHF control panel and is capable of linking up to 32 wireless detector and alarm devices. The translator allows integration into a wired system if required but also can be used[...]
  - CYHF/EM - Wireless Expander Module (Requires Power Supply)
    The CYHF/EM Expander Module is an input output device which is compatible with all CYHF Wireless translators. The unit increases the radio strength and communication beyond a single translator by relaying the radio messages to further expanders devices or directly to the wireless detectors, call points or sounder/ beacons. Using the Expander functionality it is[...]
  - CYHF/SD - Wireless Optical Smoke Detector c/w Base & Batteries
    The CYHF/SD wireless optical smoke detector is an intelligent device which links into the CYHF wireless system via the translator or expander modules. The range of wireless detectors are fully approved to EN54. This device is capable of being configured on site and has the ability to analyse different types of smoke particles to prevent[...]
  - CYHF/HD - Wireless Heat Detector c/w Base & Batteries
    The CYHF/HD wireless heat detector is compatible with the CYHF wireless translator and expander modules. This unit is an intelligent device and can be configured to different settings such as; fixed temperature, rate of rise or high temperature. This unit can be used in any application including construction sites in Temporary Accommodation Units (TAU’s) which[...]
  - CYHF/MSDB - Wireless Multi Sensor Detector c/w Base & Batteries
    The CYHF/MSDB wireless multi criteria detector is a combined smoke and heat sensor alarm unit which is intelligent and compatible with all CYHF translator and expander modules. The intelligent chamber and double dust trap provides protection from airborne contamination and dust. This device has a 5-year battery life. This smoke and heat detector can be[...]
  - CYHF/S - Wireless Detector Sounder Base
    The CYHF/S wireless sounder base unit has a fully compliant sounder in accordance with EN54:3. This base is aesthetically pleasing and is designed for ceiling or wall mount applications depending on the need of a wireless detector or simply just a sounder cover if a detector is not required. Each wireless detector sounder base unit[...]
  - CYHF/S/B - Wireless Detector Sounder & Beacon Base
    The CYHF/S/B sounder and beacon base unit is a wireless device which provides a fully compliant sounder warning in accordance with EN54:3 and a visual indicator with a flashing LED beacon. This device is aesthetically pleasing and is designed for ceiling or wall mount depending on the need of a wireless detector or simply just[...]
  - CG01 - Cygnus Protective Cage
    Bull Products have designed and developed an enclosure cage for the CYG2 Cygnus fire alarm product range. This protective cage help prevent vandalism, accidental damage, misuse and even theft. It is very important to protect these fire and first aid alarm units as these are devices and equipment that we all depend on. These alarm[...]
  - ALMWS01 – Smoke Detector
    The ALMWS01 radio link smoke detectors are an alternative solution to the Cygnus smoke detectors. These economical detectors are not linked into the Cygnus radio mesh and are not addressable into the system. They are linked into the Cygnus system by way of the CYGDI3 detector interface. The interface can control up to 11 smoke,[...]
  - ALMWS02 – Heat Detector
    The ALMWS02 radio link heat detectors are an alternative solution to the Cygnus heat detectors. These economical detectors are not linked into the Cygnus radio mesh and are not addressable into the system. They are linked into the Cygnus system by way of the CYGDI3 detector interface. The interface can control up to 11 smoke,[...]
  - ALMWS04 – Category 2 Carbon Monoxide Detector
    The ALMWS04 radio link carbon monoxide detectors are an addition to the range. These economical CO detectors are not linked into the Cygnus radio mesh and are not addressable into the system. They are linked into the Cygnus system by way of the CYGDI3 detector interface. The interface can control up to 11 smoke, heat[...]
  - CYGFAS – Cygnus Fire Action Notice
    Cygnus fire action notice is predominately designed for CYG2F devices. Other types of fire action notices are also available and other special notices are available upon request.
  - PAGE01 - Connexions Pager System Panel
    The pager Panel is plugged into the control panel which has a designated output and transmits messages to hand held paging devices carried by responsible persons. when an alert is received it doesn’t matter how far the responsible person is from the main control panel they can quickly see on the handheld device the exact[...]
  - PAGE02 – GEO Zoom Text Pager with Holster
    The hand held pager device can only work in a system, not as a standalone device. It requires the PAGE01 pager panel to translate and receive messages from the rest of the Cygnus system. This handy device comes complete with a belt holster and runs from one AAA battery. This product is CE Marked.
  - TAB02 – Tablet Computer 8” Complete with Cygnus Software
    The Cygnus software can only run on windows compatible computers. The Toshiba 8” Tablet computer is an incredibly neat compact stylish computer with Windows 8.1 preloaded. The Cygnus software is also loaded and ready for use. The Tablet computer comes with a USB to Mini USB adapter and Cygnus Addressing Cable ready for immediate use.[...]
  - CYGSC1- Cygnus Addressable Connecting Cable
    Spare Cygnus addressable connecting cable for use with TAB02 - 8'' tablet computer (Complete With Cygnus Software Preloaded)
  - AUTODI02 – Auto Dialler GSM Communicator
    Autodiallers are normally used for out of hours protection. This autodialler is connected to the panel and can be programmed with up to 10 phone numbers of responsible persons. In an emergency the dialler will immediately contact the first responsible person on the list to notify of an activation on site. This product is CE[...]
Gallery
Videos
News
- - Cygnus Products are R.E.D Compliant
    What is R.E.D? The Radio Equipment Directive (EU directive 2014/53/EU) establishes a regulatory framework for placing radio-electric equipment on the free market. It replaces the old Radio and Telecommunications Terminal Equipment (R&TTE) Directive. All product in scope of this directive and placed on the EU market must be compliant as from Tuesday 13th June 2017. Don’t[...]
  - Cygnus Wireless Alarm System Selected for Bishopsgate
    The Cygnus wireless alarm system has been incorporated within yet another impressive project; 100 Bishopsgate. 100 Bishopsgate This extensive venture is a 950,000 ft2 development of elite offices and retail accommodation at the heart of the City of London EC3, which is accompanied by a new 0.5 acre public realm. It is a 60 second[...]
  - Clarity On CE Marking For Cygnus Wireless Alarm Systems
    The Cygnus wireless fire and first aid alarm system which was launched by Bull Products only last year, was designed and developed with a number of major construction companies as a temporary system for use on construction sites. Despite its temporary use, the Cygnus system has an impressive capability for linking together 480 units in[...]
Support
Contact
- Your Name (required)
  
  Your Email (required)
  
  Location (required)
  
  Subject
  
  Your Message